View Mobile No.

our range

Rotary Dryer

The rotary dryer is a type of industrial dryer employed to reduce or minimizer the liquid moisture content of the material it is handling by bringing into direct/indirect contact with a heated gas. The dryer is made up of a large, rotating cylindrical tube, usually supported by concrete columns or steel beams. The dryer slopes slightly so that the discharge end is lower than the material feed end in order to convey the material through the dryer under gravity. Material to be dried enters the dryer, and as the dryer rotates, the material is lifted up by a series of internal fins lining the inner wall of the dryer. When the material gets high enough to roll back off the fins, it falls back down to the bottom of the dryer, passing through the hot gas stream as it falls. This gas stream can either be moving toward the discharge end from the feed end (known as co-current flow), or toward the feed end from the discharge end (known as counter-current flow). The gas stream can be made up of a mixture of air and combustion gases from a burner, in which case the dryer is called a direct heated dryer.
  • Iron Ore Pellets Dryer
  • Iron Ore Pellets Dryer
Iron Ore Pellets Dryer

Iron Ore Pellets Dryer

Rs 1 Lakh  / UnitGet Best Price

Minimum Order Quantity: 1 Unit

Automatic GradeAutomatic
Power (W)18.5
Voltage380 V
Phase3-Phase
BrandLaxmi En-Fab
UsageIndustrial
Weight23 Ton

Application: Iron ore pellets dryer is widely used in the field of building materials, metallurgies, chemical industry.

 

Introduction : Widely used in the field of building materials, metallurgies, chemical industry, cement, and more.LAXMIENFAB series Iron ore pellets dryer can dry slag, coal powder, mining powder, clay, sand, limestone, and more.

The Iron ore pellets dryer is made into rotary body, lifting blade, driving device, and supporting device.It has advantages of reasonable structure, high efficiency, low energy consumption, and convenient for transportation



Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)

View Complete details

get quoterequest a call back
  • Saw Dust Dryer
Saw Dust Dryer

Saw Dust Dryer

Rs 8 Lakh  / UnitGet Best Price

Minimum Order Quantity: 1 Unit

Capacity1-50 TPH
Max Temperature150
Automatic GradeAutomatic
DesignStandard
Power (W)10KW-150KW
Heating ResourceHot air require
Speed (RPM)2-8
Driven TypeGear transmission
Slope (%)3

The sawdust dryer is used for pellet sawdust or powder sawdust. Wet materials are continuously sent into drum through screw conveyer and then get separated and pushed by high-speed hot flow. The moisture in wet materials is taken away in this process and then we get powder or pellet dry materials.

Sawdust dryers are consist of heating furnace, feeding port, drum, filter drum, conveying pipe, cooling drum and discharging port.

Sawdust is fully dried in rotary drum and gets separated again before entering conveying pipe for further drying. The baffler can keep the impurities out of conveying pipe and ensures the high quality of dried sawdust. With the combined work of rotary drum and injection pipe, wet materials are fluidized and full contacted with hot flow.



Additional Information:

  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

View Complete details

get quoterequest a call back
  • Sludge Dryer
Sludge Dryer

Sludge Dryer

Rs 5 Lakh  / UnitGet Best Price
BrandLaxmi En-Fab
Max Temprature200~350
Warranty1 Year
Industries typeHeavy Industries
Weight18000 Kg
Dimension8000x1500x200 mm

Sludge Dryer offered finds use in areas like mineral processing, metallurgy, chemical industry and others.


Features:

  • High performance based sewage sludge dryer
  • Supporting drying of materials with specified moisture and size.


Specifications:

  • Used mainly for drying small size raw material less than 30mm
  • Wide applicability
  • Allows for simple operations and stable performance
  • Offering high efficient working performance
  • Low cost in maintenance
  • Offering large production capacity and continuous working support
  • Assure of less mechanical failure
  • Provides for uniform working support
  • Application area : metallurgy industry, chemical industry, building material, mining machinery.
  • High efficiency, energy saving.
  • Processing Capacity : 10-30/h


Additional Information:

  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),Other
  • Delivery Time: 3-4 week

View Complete details

get quoterequest a call back
  • Rotary Dryers
  • Rotary Dryers
Rotary Dryers

Rotary Dryers

Rs 7 Lakh  / UnitGet Best Price
Max Temperature200
Automatic GradeAutomatic
Voltage (V)380
Warranty1 Year
Speed (RPM)2-8
BrandLaxmi En-Fab
UsageIndustrial

Rotary dryer is an industrial dryer that is used to dry material by eliminating or reducing the moisture content. As a kind of Mining machine, the rotary dryer is widely used to dry a variety of material such as Food, coal, slag, clay, limestone, cement, chemicals, etc. It is used in the Mining industry, Food industry, chemical industry, Agro industry, construction industry. Etc.

 

Model

 

Power
HP

Inner diameter

length

Rotating
speed

D 0.8 X L 6

800 mm

6 meter

2 to 8

5

D 1 X L 7.5

1000 mm

7.5 meter

2 to 8

5

D 1.2 X L 10

1200 mm

12 meter

2 to 8

7.5

D 1.5 X L 12

1500 mm

12 meter

2 to 5

10

D 1.8 X L 12

1800 mm

12 meter

2 to 5

12.5

D 2 X L 12

2000 mm

15 meter

2 to 5

15



Additional Information:

  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

View Complete details

get quoterequest a call back
  • Pond Ash Dryer
Pond Ash Dryer

Pond Ash Dryer

Rs 11 Lakh  / UnitGet Best Price
Capacity(t/h) 1.5-9
Automatic GradeAutomatic
Power (Kw)4000-6000
Slope (%)38.5
CustomisationCustomised
DesignCustomized
Features:
  • Strong ability of anti-overloading, large capacity, low fuel consumption, low drying cost.
  • Large treatment capability, wide application, Well drying effect.
  • Indirect-heating, no material contamination.
  • High heat transfer coefficient and high thermal efficiency.
  • Retention time can be adjusted, low energy consumption.


View Complete details

get quoterequest a call back
  • Flaker Dryer
  • Flaker Dryer
  • Flaker Dryer
Flaker Dryer

Flaker Dryer

Rs 10 Lakh  / PieceGet Best Price
Brand30 to 1000 CM
Automatic GradeAutomatic
CoatingStainless Steel
Size6 Ft x 10 Ft
MaterialMild Steel, Stainless Steel
Motor Power2 HP
Model :Flaker Dryer
6" x 2" to 6 feet x 10 feet With Heating Cooling Machine
Contraction :

MS + MS / SS Coating + SS + jacketed Ideal For :

  • Pigment Colors - Minerals & Ores - Chemicals Technical Products Dyestuffs - Fertilizer - Insecticides - Pesticide
  • Extra Material Handling Screw for loading & Unloading.HP required 2 HP 1440 Electric Motor 2 No’s.( Ball milling, Ball mill India, Ball mill manufacturer)

View Complete details

get quoterequest a call back
  • Rotary Dryer Machine
  • Rotary Dryer Machine
Rotary Dryer Machine

Rotary Dryer Machine

Rs 10 Lakh  / UnitGet Best Price
Max Temperature200
Automatic GradeAutomatic, Semi-Automatic
Warranty1 Year
Speed (RPM)2-8
Weight2.9-104.9 ton
Heating SourceElectricity, Coal, Natural Gas
Rotary Dryer: We are one of the leading manufacturer and exporter of Rotary Dryer. which is used in drying and cooling of materials that flow freely.

Other Information

  • Pay Mode Terms: L/C (Letter of Credit), Western Union, Other


Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)

View Complete details

get quoterequest a call back
  • Rotary Drum Dryer
Rotary Drum Dryer

Rotary Drum Dryer

Rs 3 Lakh  / UnitGet Best Price

Minimum Order Quantity: 1 Unit

Automatic GradeAutomatic
Adjustable End-of-Cycle BuzzerYes
Speed (RPM)1.5-8
Product TypeDrum Type
Heating SourceCoal
UsageHeavy Industry
BrandLaxmi En-Fab
Heating MediumHot Air

Description:

  • Drum dryers convert viscous liquids and pastes into dry powders, flakes, or sheets
  • Standard atmospheric model consists of a single heated drum supported on trunnions that turn in journal or roller type bearings
  • Feed materials are applied to drum with splash or dip devices, or with applicator rolls
  • Heat conducted through the drum wall evaporates moisture from wet product film during partial revolution of drum
  • Single layer applications dry to a lacy sheet or flake
  • Multiple layer applications dry to uniform thickness and density with minimum dusting
  • Can be equipped with "satellite" applicator rolls spaced around periphery of drum to eliminate void areas, permitting drying between successive layers of fresh material, and forming thick consistent product sheets gradually
  • Mechanical support skids are available for single drum dryers

Features:
  • Standard sizes as large as 60" x 192" with 251 square feet of drying surface
  • Includes liquid or paste feed and adjustable knife
  • Contains long-life roller bearings, compact hollow-bore gear drives, and fully automatic drum and roll gap control
  • Turnkey system comprises pre-concentrating evaporators, PLC controls, drum temperature regulation, mezzanines, size reduction, sifters, and mechanical or pneumatic conveyors
  • Five (5) independently driven "satellite" applicator rolls available
  • Screw conveyor option available


Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
  • Delivery Time: 3-4 Week

View Complete details

get quoterequest a call back
  • Clay Dryer
Clay Dryer

Clay Dryer

Rs 3.5 Lakh  / UnitGet Best Price
Automatic GradeAutomatic
Voltage 220-440V
Power (W)3-75
BrandLaxmi En-Fab
ApplicationDrying Clay
Weight2.9-104.9 Tons
The rotary dryer is a type of industrial dryer employed to reduce or minimizer the liquid moisture content of the material it is handling by bringing into direct/indirect contact with a heated gas. The dryer is made up of a large, rotating cylindrical tube, usually supported by concrete columns or steel beams. The dryer slopes slightly so that the discharge end is lower than the material feed end in order to convey the material through the dryer under gravity. Material to be dried enters the dryer, and as the dryer rotates, the material is lifted up by a series of internal fins lining the inner wall of the dryer. When the material gets high enough to roll back off the fins, it falls back down to the bottom of the dryer, passing through the hot gas stream as it falls. This gas stream can either be moving toward the discharge end from the feed end (known as co-current flow), or toward the feed end from the discharge end (known as counter-current flow). The gas stream can be made up of a mixture of air and combustion gases from a burner, in which case the dryer is called a direct heated dryer

Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)

View Complete details

get quoterequest a call back
  • Waste Dryer
Waste Dryer

Waste Dryer

Rs 5 Lakh  / UnitGet Best Price

Minimum Order Quantity: 1 Unit

Max Temperature200~350
Automatic GradeSemi-Automatic, Automatic
Power (W)30
Weight (kg)80000 Kg
BrandLaxmi En-Fab
RPM2-8
The rotary dryer is a type of industrial dryer employed to reduce or minimizer the liquid moisture content of the material it is handling by bringing into direct/indirect contact with a heated gas. The dryer is made up of a large, rotating cylindrical tube, usually supported by concrete columns or steel beams. The dryer slopes slightly so that the discharge end is lower than the material feed end in order to convey the material through the dryer under gravity. Material to be dried enters the dryer, and as the dryer rotates, the material is lifted up by a series of internal fins lining the inner wall of the dryer. When the material gets high enough to roll back off the fins, it falls back down to the bottom of the dryer, passing through the hot gas stream as it falls. This gas stream can either be moving toward the discharge end from the feed end (known as co-current flow), or toward the feed end from the discharge end (known as counter-current flow). The gas stream can be made up of a mixture of air and combustion gases from a burner, in which case the dryer is called a direct heated dryer

Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)

View Complete details

get quoterequest a call back
  • Mineral Dryer
Mineral Dryer

Mineral Dryer

Rs 5 Lakh  / NumberGet Best Price

Minimum Order Quantity: 1 Number

Automation GradeAutomatic
Capacity5-50 TPH
Max Temperature200~800
Automatic GradeAutomatic
UsageIndustrial And Agriculture
BrandLaxmi En-Fab
Application: It Is Widely Used In Building Material, Metallurgy, And Chemical Engineering, Cement Industries For Drying Of Mineral Slag Limestone, Coal Dust, Mineral Slag, And Clay.

 



Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)

View Complete details

get quoterequest a call back
  • Sand Dryer
Sand Dryer

Sand Dryer

Rs 6 Lakh  / UnitGet Best Price

Minimum Order Quantity: 1 Unit

Capacity2-50 tph
Max Temperature200
Voltage (V)380
Rotor Speed (RPM)2.69
BrandLaxmi En-Fab
MaterialMS Material
Automatic GradeAutomatic
RPM2-8
Sand dryer is a kind of processing large amounts of material drying machine. Due to the reliable operation, good adaptability, high yield, widely used in metallurgy, building materials, food, chemicals, coal, medicine and other materials. Sand dryer belong to rotating cylinder dryer. Commonly adapted to the powder and granular materials, can also use the mixing material approach drying viscous paste-like material or high water content materials. Especially dry sand, TaiDa sand dryer effect is excellent. Sand dryer with advantages of great capacity of production, wide application, small flow resistance, convenient operation, etc.

Sand Dryer Structure:
  •  The cylinder
  • The front roller ring
  •  After the roller ring
  •  Gear
  •  Gear roller
  •  Drag roller
  •  Small gear
  •  The discharging part
  •  Board
  •  Speed reducer
  •  Electric machinery
  •  Hot air duct
  •  Feed chute
  •  Furnace bo


Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)

View Complete details

get quoterequest a call back
  • Wood Chip Dryer
Wood Chip Dryer

Wood Chip Dryer

Rs 5 Lakh  / UnitGet Best Price

Minimum Order Quantity: 1 Unit

Max Temperature200
Automatic GradeAutomatic
Power (W)155
RPM2-8
TypeRotary
Weight76 Tons
The rotary dryer is a type of industrial dryer employed to reduce or minimizer the liquid moisture content of the material it is handling by bringing into direct/indirect contact with a heated gas. The dryer is made up of a large, rotating cylindrical tube, usually supported by concrete columns or steel beams. The dryer slopes slightly so that the discharge end is lower than the material feed end in order to convey the material through the dryer under gravity. Material to be dried enters the dryer, and as the dryer rotates, the material is lifted up by a series of internal fins lining the inner wall of the dryer. When the material gets high enough to roll back off the fins, it falls back down to the bottom of the dryer, passing through the hot gas stream as it falls. This gas stream can either be moving toward the discharge end from the feed end (known as co-current flow), or toward the feed end from the discharge end (known as counter-current flow). The gas stream can be made up of a mixture of air and combustion gases from a burner, in which case the dryer is called a direct heated dryer

Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)

View Complete details

get quoterequest a call back
  • Husk Dryer
Husk Dryer

Husk Dryer

Rs 15 Lakh  / UnitGet Best Price

Minimum Order Quantity: 1 Unit

Automatic GradeAutomatic
Voltage380 V
BrandLaxmi En-Fab
TypeRotary
ApplicationFor Husk
WeightUp to 110 Tons
Advantages:
  • High efficiency and less energy consumption,Saving 5% energy
  • The fuel can be coal ,oil and gas.
  • The water content of the product is less than 0.5% after drying.
  • Simple operation .It is easy to adjust the date of the water content of the product


Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)

View Complete details

get quoterequest a call back
  • Coconut Biomass Dryer
  • Coconut Biomass Dryer
Coconut Biomass Dryer

Coconut Biomass Dryer

Rs 10 Lakh  / PieceGet Best Price

Minimum Order Quantity: 1 Piece

BrandLaxmi EN-Fab
MaterialMild Steel
Automation GradeAutomatic
Surface FinishCoated
Automatic GradeAutomatic
Inner Diameter800 mm
Power5 HP
Length6 m
Rotating Speed2 to 8 RPM
The rotary dryer is a type of industrial dryer employed to reduce or minimizer the liquid moisture content of the material it is handling by bringing into direct/indirect contact with a heated gas. The dryer is made up of a large, rotating cylindrical tube, usually supported by concrete columns or steel beams. The dryer slopes slightly so that the discharge end is lower than the material feed end in order to convey the material through the dryer under gravity. Material to be dried enters the dryer, and as the dryer rotates, the material is lifted up by a series of internal fins lining the inner wall of the dryer. When the material gets high enough to roll back off the fins, it falls back down to the bottom of the dryer, passing through the hot gas stream as it falls. This gas stream can either be moving toward the discharge end from the feed end (known as co-current flow), or toward the feed end from the discharge end (known as counter-current flow). The gas stream can be made up of a mixture of air and combustion gases from a burner, in which case the dryer is called a direct heated dryer

Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
  • Production Capacity: 1 - 10 TPH
  • Delivery Time: 1 month

View Complete details

get quoterequest a call back
  • Limestone Dryer
  • Limestone Dryer
Limestone Dryer

Limestone Dryer

Rs 5 Lakh  / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Capacity10
Automatic GradeAutomatic
Power75
Rotor Speed2-8
Phase3-Phase
BrandLaxmi En-Fab
Rotary Dryer Degree500-700
Warranty1 Year
The rotary dryer is a type of industrial dryer employed to reduce or minimizer the liquid moisture content of the material it is handling by bringing into direct/indirect contact with a heated gas. The dryer is made up of a large, rotating cylindrical tube, usually supported by concrete columns or steel beams. The dryer slopes slightly so that the discharge end is lower than the material feed end in order to convey the material through the dryer under gravity. Material to be dried enters the dryer, and as the dryer rotates, the material is lifted up by a series of internal fins lining the inner wall of the dryer. When the material gets high enough to roll back off the fins, it falls back down to the bottom of the dryer, passing through the hot gas stream as it falls. This gas stream can either be moving toward the discharge end from the feed end (known as co-current flow), or toward the feed end from the discharge end (known as counter-current flow). The gas stream can be made up of a mixture of air and combustion gases from a burner, in which case the dryer is called a direct heated dryer

Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
  • Production Capacity: 10
  • Delivery Time: 1-Month

View Complete details

get quoterequest a call back
  • Salt Dryer
Salt Dryer

Salt Dryer

Rs 5 Lakh  / UnitGet Best Price

Minimum Order Quantity: 1 Unit

BrandLaxmi En-Fab Pvt. Ltd.
Automation GradeAutomatic
Automatic GradeAutomatic
Diameter (m)4.2
I Deal InNew Only
Warranty1 Year
Shell Cubage110.78 cubic meter
The rotary dryer is a type of industrial dryer employed to reduce or minimizer the liquid moisture content of the material it is handling by bringing into direct/indirect contact with a heated gas. The dryer is made up of a large, rotating cylindrical tube, usually supported by concrete columns or steel beams. The dryer slopes slightly so that the discharge end is lower than the material feed end in order to convey the material through the dryer under gravity. Material to be dried enters the dryer, and as the dryer rotates, the material is lifted up by a series of internal fins lining the inner wall of the dryer. When the material gets high enough to roll back off the fins, it falls back down to the bottom of the dryer, passing through the hot gas stream as it falls. This gas stream can either be moving toward the discharge end from the feed end (known as co-current flow), or toward the feed end from the discharge end (known as counter-current flow). The gas stream can be made up of a mixture of air and combustion gases from a burner, in which case the dryer is called a direct heated dryer

View Complete details

get quoterequest a call back
  • Tray Dryer
Tray Dryer

Tray Dryer

Rs 2 Lakh  / UnitGet Best Price
Capacity48-196 Tray
Automatic GradeSemi-Automatic
ControlThrough penal
Heating MediaSteam, electric, Hot Air Genrator
PortableYes
MaterialMS & SS material
Tray Dryers are useful in Chemical, Dyestuffs, Pharmaceutical, Food and Automobile Industries. A Tray Dryer is an enclosed, insulated housing in which Trays are placed on angled rack. Material to be dried is placed on the trays. Heating media is Hot Air, and heat transfer is direct from Hot gases or Electric heaters to Wet raw material with help of specially desig ned Air circulation fan arrangement to maintain the constant temperature in the dryer and ensures uniform circulation of hot air. This will Enhance the Drying of raw material & reduces the Drying time DrasticallyLaxmi En Fab drying oven or Tray Dryer is specially designed for Pharmaceuticals, Food, Chemicals, Paints, Textiles & other industries. It is well accepted for economical drying of granules, powder , food material & chemicals.

The advantages of this system are:
• Simple, low cost chamber
• Low labour costs - simply load and then unload
• A tendency to over-dry the lower trays
• Design for uniform circulation of hot air in the drying chamber
• Heating cold and fan motor having electrical inter locking for safety of heating elements

Mode

Outer of dimenson Of Frame work (WxDxH) mm.

Capcity of in

Rating oven

Fan Nos

Motor Nos

Rating Nos

Nos Trolleyes

 

LAd- 12

1600x535x1015

12

4

1

1

0.5

1

LAD-24

1880X990X1880

48

12

1

1

1

1

LAd- 24

1600x940x1015

24

6

2

1

0.5

1

LAD-96

3200X990X1880

96

18

2

2

1

2

LAD-192

3200X1880X1880

192

24

4

2

1.5

4



Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)

View Complete details

get quoterequest a call back

EXPLORE MORE CATEGORIES